- Max velocity for flowpattern heating case added.
- Extract devices can be added to projects.
- Possibility to export chilled beams to Magicad added.
- Bug fixes for Stella, KHLA.
- Added russian.
- Added filtering for inactive products.
- Updates to pressure drop calculation for devices with damper.
- Added maximum velocity for heating case in project view and printout.
- Added danish.
- Support for chilled beams with heating foil.
- Changed throw length calculation, now a more advanced calculation is used which
also takes into account the placement of the device.
- Vertical throw length support for heating.
- Warning when the input pressure drop is outside working ranges when calculating
for devices with damper.
- Support for localised units.
- Performance improvements in catalogue printout.
- Support for displaying heating in flow pattern.
- Possible to calculate ATD (with damper setting) for specified air pressure drop.
- Modifications in flow-pressure calculations for ATD in sound diagram tab.
- Changed induction calculation for chilled beams (back to the way it was before).
- Support for specifying default view for 3D-room, under user settings.
- Support for heating calculation for air terminal devices.
- Additional support and bug fix for STELLA.
- Updated throw length calculation for air terminal devices.
- Support for STELLA.
- Changed induction calculation for chilled beams (affects throw length and flow
pattern).
- Quick selection properties for FPC and nozzle arrangement for chilled beams.
- Minor layout changes in cooling calculation requirement page.
- Bug fix for imperial units in project room.
- Bug fix for ASTRA in sound diagram.
- Bug fix for ASTRA.
- Bug fix for ASTRA.
- New tab under project device node, for getting back to Room 3D.
- General performance improvements.
- Bug fix regarding other (than default) calculation alternative in project.
- Support for ASTRA.
- Support for changed air flow limits for DCKA.
- Improvements in Cooling Requirements Calculation.
- Bug fix regarding export of result list to excel.
- Catalogue and project tree view on separate tabs.
- Possible to configure user setting of unit for air flow and waterflow.
- Comfort boundary for floormasters.
- Max velocity in occupied zone.
- Point of placement and air flow in 3D model.
- Intelligent placement of devices in room.
- Actions on selected device in room (goto, delete).
- View all current warnings.
- Cancel button in printout.
- Products in room are no longer rearranged
when products are added and removed.
- Possible to copy project, buildning and room.
- Device coordinates can be manually entered.
- Products can be vertically moved in room. Change placement vertically by coordinates
in text or by shift+move.
- Possible beam collisions are indicated in room.
- Only products with complete data can be entered in room.
- Version control of product data added.
- QVFB only has room temp.
- Product catalogue items sort order added.
- Possible to add complete product document general.
- Added notes text field to Calculation tab.
- Support for silencer BAKR and BBKR added.
- Possible to add air terminal devices in room in project.
- Flow pattern is shown in 3D for air terminal devices.
- Export project and room data to excel-sheet. (Right click project or room).
- Fan coils available in product catalogue.
- Heating data is available for IQID.
- Performance improved.
- Room specification is moved to navigation pane.
- New cooling beams IQFD and IQFE are included
- Several error correstions to product catalogue.
- Major improvements to project part of the program where it is possible to add
several cooling beams.
- Dimensioning of products can be made with some properties "locked".
- Possible to rotate beams in project rooms.
- Possible to select several beams in project rooms.
Calculation of uneven air distribution is not included for all beam types and is
dependent of more product data or changed calculation algorithms.
Heating power is not available for all beam types and is dependent of more product
data.
- Dimensioning of products works with more than one device.
- Beams can be moved in the roommodel (project part).
- Calculation inputdata is validated at the client. Ranges are updated immedeately
when properties are changed.
- User interface is improved regarding calculation and calculation parameters.
- Documents for ATDs are updated.
- Support for company specific documents.
- Added possibility to move devices in Room 3D page.
- Added content selection to room printout.
- QVFB now supports heating in dimensioning calculation.
- Dimensioning calculation now also includes number of units.
- Project. It is now possible with a valid username and password to access and create
projects.
- In Room 3D in projects it is now possible to view flow pattern collisions if the
beams are along the same x- or z-axis.
- Projects are only visible to the creator.
- Logo included on print outs.
- Room 3D in projects shows a simple model if the chilled beams devices as default.
It is possible to show the detailed model by choosing this in the View Options menu.
- Chilled beams now have a the throw length tab enabled.
- It is possible to add ATDs to the room in projects.
- If Mode: Cooling is selected, heat results are not show nor printed.
- Room sound is calculated.
- User gets information in the message bar about unsaved data in projects.
- When entering the Room 3D tab page in projects, a room validation takes place
shows errors in the message bar if any errors are found.
- It is possible to turn flow pattern on and off.
- It is possible to do a cooling calculation of the room in projects.
- New sound diagram show damper settings 0 to 100.
- Carrier uses http protocol as default when communicating with the server.
- Dimension result is always showing.
- Heating input fields are hidden in cooling mode in the calculation tab.
- It is possible to exit application using Exit in File menu.
- Calculation image can be selected in printout.
- Property selector is hidden for document tabs.
- Water settings are only shown when appropriet.
- It is now possible to dimension ATDs on sound.
- Possible to set default product data per product.
- Data for devices with different damper openings is corrected.
- More data for air terminal devices are added.
- Property selector is updated according to selected tree node.
- Only selected language is downloaded to client to minimise installation package.
New functionality:
- It is now possible to calculate waterflow when providing watertemp in/out.
- Waterflow now has 3 decimals.
- Introduction of calculation tools in ExSelAir.
- Added Smoke Extraction calculation tools.
- Added Cooling calculation to calculation tools.
- 3D model in Smoke Extraction calculation tool.
- 3D picture of room added to Cooling calculation
- Support for new languages in ExSelAir. German, French, Spanish, Polish and Portuguese.
- Project node added to tree. Available for evaluation only. Accessible by choosing
Test mode in Help->Test in menu.
- Added possibility to save data in the project tree nodes.
- Project node items have commands accessible both in menu and by right-clicking
on the node.
- Project access requires valid login.
- Company logo added to the bottom left in the UI.
Modifications:
- PDZ can now show flowpattern.
- Waterflow value precision enhanced on calculation tab.
- "Mode: Cooling" on calculation tab now handles multiple languages.
- Property selector now handles multiple languages.
ยง
New functionality:
- Multiple Qmodels supported.
- Fancoils calculation is available for testing.
- Project in test mode.
New functionality:
- Result list added. In the calculation tab it is now possible to add a calculated
device to a result list. The result list is in memory only (i.e. the list will be
lost when the program is closed) but it is possible to export the result list to
an Excel document.
- Flow pattern 2D is added for Air terminal devices and Chilled beams.
Product list:
- Added reset button for filter properties.
Calculation:
- Added Delta T in calculation tab.
- It is now possible to calculate using different damper settings on ATD's with
connection box and slot settings on ATD's with adjustable slot.
- In the dimensioning result list, the column headers are now shortened to save
space.
Print:
- Added accessories images to print out.
3D model:
- DXF export is now functioning.
Products:
- When there is missing data registered for a product, the tabs affected by this
are now disabled.
New products in catalogue
- IQCA
- IQIB is available for US-market
- IQIC is available for US-market
- Product data has been added for several ATD
Result list:
- Possible to save product calculation result together with product code to a result
list. The list can be saved to a local Excelfile on the client computer.
Calculation:
- Correction regarding conversion between SI-units and imperial units.
- It is possible to set result range for dimensioning.
- Calculation result is automatically updated when a product from dimensioning list
is selected.
Print:
- Print function has been updated.
New products in catalogue
- All ATD have been added with general , dimension , 3D-model and product code tabs
opened.
- Perimater wall system QVFB has been added with general , dimension , 3D-model,
calculation, sound and product code tabs opened.
Catetgory documents
- Possible to print all category documents.
Flow pattern:
- Flow pattern problems have been solved. The flow pattern is now correct.
-- Numbers have been added to scale.
Calculation:
- Dimensioning of beams can be done with air pressure drop and power as input.
- It is possible to set result range for dimensioning.
- Calculation result is automatically updated when a product from dimensioning list
is selected.
Sound:
- Sound chart for QVFB is added.
General:
- A- All images are cached on the client for better performance.
- Several minor corrections of functionality and product documents.
Message bar:
Message bar at the top telling user when a reload of the current page is needed.
Property Selector:
Help texts are added to the property selector.
It is possible to add tool tip text for all properties.
You get help information if a property value is depending on the setting of another
property.
Properties are sorted.
Location bar:
Product code for the current setting of properties is shown.
Logging:
Possible to log all server calls to check response times.
Chilled beams: A quick selection tab is included.
3D-model:
Some different lighting options are available.
Calculation:
A graphical image of the beam is shown in order to help understanding the functionality
of the beam better.
A dimensioning calculation is added.
Flow pattern:
A scale is added to be able show threw length.
The device is shown together with the flow pattern.
A room occupied zone is included.
Go Back